Posts Tagged ‘Templates’

Demonstration of the Tensilkut II

June 23, 2015

The Tensilkut II is used to easily prepare flat tensile, compression, flexural and other specimens from metals and non-metallics.  This machine is designed for operation in the testing lab by technicians without previous machining experience.

The starting blank is inserted into the Tensilkut Master Template, and the clamping screws are tightened as shown in this video.  The micrometer dial on the Tensilkut control head is set to its starting position, and a series of light passes are taken to cut the material from each side of the specimen.  When the correct tensile specimen dimensions are achieved, the micrometer dial will stop turning, thus preventing cutting an undersized test specimen.  After removing the completed ASTM E8 or other specimen from the master template, the tensile bar is ready for immediate testing.

ASTM D412 Die C Tensile Specimens

May 13, 2015
Tensilkut Master Templates 50-92, 50-93 and 50-94 for preparing rubber test specimens in accordance with ASTM D412 Die C: Available for use on Tensilkut I and Tensilkut II models.

Tensilkut Master Templates 50-92, 50-93 and 50-94 for preparing rubber test specimens in accordance with ASTM D412 Die C: Available for use on Tensilkut I and Tensilkut II models.

50-94 Tensilkut Template for ASTM D412 Die C

50-94 Tensilkut Template for ASTM D412 Die C

50-93 Tensilkut Template

50-93 Template: ASTM D412 Die C

50-92 Template

50-92 Template

Flexural Specimen Preparation

May 11, 2015

For .500″ wide strips, Tensilkut Master Templates will prepare specimens in accordance with ASTM D790.

50-72 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-72 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

Tensilkut Master Templates for preparing ASTM D790 flexural specimens using all available Tensilkut I and Tensilkut II machines.

Tensilkut Master Templates for preparing ASTM D790 flexural specimens using all available Tensilkut I and Tensilkut II machines.

50-73 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-73 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

50-74 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-74 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

 

Also available: Templates for preparing 1″ ASTM D790 flexural specimens.

50-77 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790: for use on 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

50-77 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790: for use on 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

Tensilkut Master Templates for preparing 1.000" wide flexural bars in accordance with ASTM D790 are available for use on all Tensilkut I and Tensilkut II models

Tensilkut Master Templates for preparing 1.000″ wide flexural bars in accordance with ASTM D790 are available for use on all Tensilkut I and Tensilkut II models.

50-78 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790

50-78 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790: for use on 10-30 and 10-58 series Tensilkut I and 10-85 Tensilkut II

50-79 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790

50-79 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790

ASTM D1822 Type L Tensile Impact Bars

May 11, 2015

Master Templates for preparing ASTM D1822 Type L Tensile Impact bars for use with the Tensilkut I and Tensilkut II:

50-69 ASTM D1822 Type L Tensilkut Master Template: for use with 10-68 or 10-78 Tensilkut I or 10-88 Tensilkut II

50-69 ASTM D1822 Type L Tensilkut Master Template: for use with 10-68 or 10-78 Tensilkut I or 10-88 Tensilkut II

50-68 Tensilkut Master Template in accordance with ASTM D1822 Type L

50-68 Tensilkut Master Template in accordance with ASTM D1822 Type L

Templates for preparing ASTM D1822 Type L specimens on all available Tensilkut I and Tensilkut II models

Templates for preparing ASTM D1822 Type L specimens on all available Tensilkut I and Tensilkut II models

50-67 Tensilkut Master Template for preparing ASTM D1822 Type L Tensile Impact Specimens

50-67 Tensilkut Master Template for preparing ASTM D1822 Type L Tensile Impact Specimens

ASTM D1822 Type S Tensile Impact Bars

May 11, 2015

ASTM D1822 Type S Tensile Impact bars are typically used when the available material is too small to prepare traditional impact bars.  Tensilkut Engineering has a master template to fit every Tensilkut I and Tensilkut II machine which will easily prepare these test bars.

50-64 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars on 10-68 or 10-78 Tensilkut I and 10-88 Tensilkut II models

50-64 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars on 10-68 or 10-78 Tensilkut I and 10-88 Tensilkut II models

50-63 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars on select Tensilkut I and Tensilkut II models

50-63 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars on select Tensilkut I and Tensilkut II models

50-62 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars

50-62 Tensilkut Master Template for preparing ASTM D1822 Type S tensile impact bars

ASTM D638 Type III Templates

May 11, 2015
The 50-57 Template for preparing ASTM D638 Type III tensile bars on the 10-20 or 10-40 series Tensilkut I or 10-82 Tensilkut II

The 50-57 Template for preparing ASTM D638 Type III tensile bars on the 10-20 or 10-40 series Tensilkut I or 10-82 Tensilkut II

The family of Tensilkut Master Templates available for preparing tensile bars in accordance with ASTM D638 Type III on all available Tensilkut I and Tensilkut II model machines

The family of Tensilkut Master Templates available for preparing tensile bars in accordance with ASTM D638 Type III on all available Tensilkut I and Tensilkut II model machines

The 50-58 Template for preparing ASTM D638 Type III tensile bars on the 10-30 series or 10-58 Tensilkut I or 10-85 Tensilkut II

The 50-58 Template for preparing ASTM D638 Type III tensile bars on the 10-30 series or 10-58 Tensilkut I or 10-85 Tensilkut II

The 50-59 Template for preparing ASTM D638 Type III tensile bars on the 10-68 or 10-78 Tensilkut I or 10-88 Tensilkut II

The 50-59 Template for preparing ASTM D638 Type III tensile bars on the 10-68 or 10-78 Tensilkut I or 10-88 Tensilkut II

Tensilkut Master Templates for Subsized Metal Specimens

May 7, 2015

The 50-30 series Tensilkut Master Templates are used to prepare modified ASTM E8 subsized specimens, with a .250″ x 2″ gauge section.

Tensilkut Master Templates 50-34, 50-36, 50-38

Tensilkut Master Templates 50-34, 50-36, 50-38

50-34 Template for use with 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

50-34 Template for use with 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

50-36 Template for use with Tensilkut I and Tensilkut II

50-36 Template for use with Tensilkut I and Tensilkut II

50-38 Template for use with Tensilkut I and Tensilkut II

50-38 Template for use with Tensilkut I and Tensilkut II

Tensilkut Master Templates for ASTM E8 Subsized Specimens

May 7, 2015

The 50-20 series Tensilkut Master Templates are used for preparing metals specimens in accordance with ASTM E8 for subsized bars.

Tensilkut Master Templates 50-24, 50-26, 50-28

Tensilkut Master Templates 50-24, 50-26, 50-28

50-24 Template for preparing ASTM E8 Subsized Tensile Specimens

50-24 Template for preparing ASTM E8 Subsized Tensile Specimens

50-26 Tensilkut Master Template for ASTM E8 Subsized Specimens

50-26 Tensilkut Master Template for ASTM E8 Subsized Specimens

50-26 Tensilkut Master Template for ASTM E8 Subsized Specimens

50-28 Tensilkut Master Template for ASTM E8 Subsized Specimens

Special Master Templates

November 23, 2013
Tensilkut Master Templates

Tensilkut Master Templates

Tensilkut Engineering makes a wide variety of special templates to meet each customer’s needs.  The ASTM A370 Template for making tensile samples with an 8″ gauge length is pictured at the top of this picture.  Also shown is a template with bushings for drilling holes for use in pin loaded grips.  Other custom configurations, including very small and very large templates, can be made.

Contact us for more information on completing your specimens.

Modified ASTM E8 Subsized Tensile Bars

November 12, 2013

This is the 50-36 Template.  It was developed for people who need a narrower bar than the ASTM E8 standard, but want one longer than the standard subsized specimen.

50-36 Template

50-36 Template

The 50-36 template makes a specimen which is .500″ overall width and about 8″ long.  The gauge section is .250″ wide with a taper of .001″ to .002″, a gauge length of 2/00″, and a reduced length of 2.25″.

This template is used with the 10-33 table model Tensilkut I, 10-38 Floor model Tensilkut I, and the 10-85 Tensilkut II.  Similar templates which make the same specimen are available for use with other Tensilkut models.

Please contact us if you would like a quote for this or any other template.