Posts Tagged ‘ASTM D5379’

Notched Samples: Impact and Shear Testing

September 7, 2017

Tensilkut is known for high quality, accurate machines for preparing flat and round tensile bars.  But we also build machines for notching specimens, which is one of the hardest things to accomplish.  For Impact specimens in accordance with ASTM A370 for metal bars, we offer the Impactkut, a fast, accurate and durable machine which broaches the notches with a single stroke of the 24″ long

Charpy impact specimen, Izod impact specimen, Iosipescu Shear Test ssample

From top: ASTM A370 Impact specimen, ASTM D256 Fiberglass Impact specimens (2), ASTM D5379 Shear Test Specimen

broach tool.

ASTM D256 specimens are used for testing plastic or composite impact specimens; the Impactmill notches those specimens in one pass through the machine.

For Iosipescu Shear Test specimens in accordance with ASTM D5379 or ASTM D7078, the V-Mill notches both sides of the specimen quickly, with the notches perfectly aligned.  This machine was developed in response to customers in the aerospace industry, who were among the earliest to suffer the difficulties of preparing these notches.

Visit our website at the links above for these specific machines, or  for a summary of all of our products.

Advertisements

V-Mill Demonstration

August 28, 2017

For the testing of composites, few samples are harder to make than the shear test specimen, whether for the ASTM D5379 V-Notched Beam Method sample, or the ASTM D7078 V-Notched Rail Method sample.  In response to demand for an easier way to notch these blanks, Tensilkut Engineering developed the V-Mill I, which employs a custom diamond coated wheel to accurately complete the notch without tool marks or deformation, while maintaining the tight tolerances, including depths and angles, required for a successful test.

This is a video demonstration, which first explains the principles behind the machine, followed by the actual notching of a carbon fiber specimen.

The specimen finished during this demonstration, along with two others made from different materials, are shown here.

ASTM D5379 Iosipescu Shear Test specimens prepared on the V-Mill

ASTM D5379 Iosipescu Shear Test specimens prepared on the V-Mill

Please visit our website for more information on the V-mill, or fill out the form below for answers to your specific needs (sorry, but we had to remove the form due to a spammer in Slovakia filling it out 20 times per day).

Iosipescu Shear Test Sample Preparation

November 14, 2013

One of the biggest challenges in preparation of the V notches for shear testing in accordance with ASTM D5379 or ASTM D7078 is the perfect alignment of the notches on opposite edges of the prepared specimen blank.  Tensilkut’s V-Mill is designed specifically to address that issue.

V-Mill

V-Mill for Iosipescu Shear Test Sample Preparation

The machine is shipped adjusted for correct placement of the notch within the blank.  The specimen blank is clamped within a two sided template and not removed until the notches are complete.  A series of light passes ensure that the notches are evenly cut, and our specially designed cutter creates the 90 degree notch with a perfect radius at its base.

V-Mill Gauge

V-Mill height indicator gauge

The V-Mill contains a precision height gauge which can be used to check the placement of the cutter; this would most often be done when the cutter is replaced.  The height gauge ensures that the placement of the notches is correctly centered along the length of the specimen.

ASTM D5379

ASTM D5379 Specimen

Please call, email or visit our website for more information on the V-Mill.

ASTM D5379 Shear Samples

August 16, 2013

Recently, Tensilkut was asked to develop a method to prepare samples in accordance with ASTM D5379 for Shear Test Samples with a V-notch on either side.  These samples are to be used with the Iosipescu Shear Test Fixtures, as supplied by major testing machine manufacturers.  This test method for composites was developed during the 1980s, and the ASTM specimen was finalized in 1993.  The standard specimen is 3″ by .75″, and can be up to 1/2″ thick.  Identical notches are cut into either side of the specimen for accurate testing.  Tensilkut Engineering has developed a new machine specifically for preparing samples to ASTM D5379.

For use in Iosipescu test fixtures

For use in Iosipescu test fixtures

ASTM D5379 Shear Sample

ASTM D5379 Shear Sample

V Notched Shear Sample

V Notched Shear Sample

Specimens in accordance with ASTM D7078 can also be prepared on this new machine.  Please contact us for more details on the new V-Mill for the accurate preparation of Shear Test Samples.