Archive for the ‘V-Mill’ Category

Notched Samples: Impact and Shear Testing

September 7, 2017

Tensilkut is known for high quality, accurate machines for preparing flat and round tensile bars.  But we also build machines for notching specimens, which is one of the hardest things to accomplish.  For Impact specimens in accordance with ASTM A370 for metal bars, we offer the Impactkut, a fast, accurate and durable machine which broaches the notches with a single stroke of the 24″ long

Charpy impact specimen, Izod impact specimen, Iosipescu Shear Test ssample

From top: ASTM A370 Impact specimen, ASTM D256 Fiberglass Impact specimens (2), ASTM D5379 Shear Test Specimen

broach tool.

ASTM D256 specimens are used for testing plastic or composite impact specimens; the Impactmill notches those specimens in one pass through the machine.

For Iosipescu Shear Test specimens in accordance with ASTM D5379 or ASTM D7078, the V-Mill notches both sides of the specimen quickly, with the notches perfectly aligned.  This machine was developed in response to customers in the aerospace industry, who were among the earliest to suffer the difficulties of preparing these notches.

Visit our website at the links above for these specific machines, or  for a summary of all of our products.

Advertisements

V-Mill Demonstration

August 28, 2017

For the testing of composites, few samples are harder to make than the shear test specimen, whether for the ASTM D5379 V-Notched Beam Method sample, or the ASTM D7078 V-Notched Rail Method sample.  In response to demand for an easier way to notch these blanks, Tensilkut Engineering developed the V-Mill I, which employs a custom diamond coated wheel to accurately complete the notch without tool marks or deformation, while maintaining the tight tolerances, including depths and angles, required for a successful test.

This is a video demonstration, which first explains the principles behind the machine, followed by the actual notching of a carbon fiber specimen.

The specimen finished during this demonstration, along with two others made from different materials, are shown here.

ASTM D5379 Iosipescu Shear Test specimens prepared on the V-Mill

ASTM D5379 Iosipescu Shear Test specimens prepared on the V-Mill

Please visit our website for more information on the V-mill, or fill out the form below for answers to your specific needs (sorry, but we had to remove the form due to a spammer in Slovakia filling it out 20 times per day).