Archive for the ‘straight strips’ Category

Tensilshear

May 23, 2015

The Tensilshear is an easy way to cut strips from small sheets of metal, including aluminum, brass, steel, and even harder materials.

Tensilshear for shearing straight strips from metals

Tensilshear for shearing straight strips from metals

A pair of micrometer adjustments on the back move the stop to enable you to simply push your sheet of up to 10″ wide metal under the blade until it reaches the stop, make sure it’s firmly in place, and cut off a strip.  The process can be repeated for as many strips as you need. It is a compact, manually operated unit, requiring neither electrical nor air hookup to operate.

The reverse of the Tensilshear, showing the micrometer adjustments for setting strip width

The reverse of the Tensilshear, showing the micrometer adjustments for setting strip width

 

The Tensilshear will shear strips from 1/8″ (3mm) thick aluminum or materials of similar hardness, and up to 2mm thick steel.  The hardened, precision ground blades are adjustable to eliminate virtually all edge burring problems.  The video below shows the Tensilshear being used to shear strips from 2mm thick hardened steel.

Visit our website or fill in the form below for more information or a quotation.

Flexural Specimen Preparation

May 11, 2015

For .500″ wide strips, Tensilkut Master Templates will prepare specimens in accordance with ASTM D790.

50-72 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-72 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

Tensilkut Master Templates for preparing ASTM D790 flexural specimens using all available Tensilkut I and Tensilkut II machines.

Tensilkut Master Templates for preparing ASTM D790 flexural specimens using all available Tensilkut I and Tensilkut II machines.

50-73 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-73 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

50-74 Tensilkut Master Template for preparing .500" wide ASTM D790 specimens

50-74 Tensilkut Master Template for preparing .500″ wide ASTM D790 specimens

 

Also available: Templates for preparing 1″ ASTM D790 flexural specimens.

50-77 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790: for use on 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

50-77 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790: for use on 10-20 and 10-40 series Tensilkut I and 10-82 Tensilkut II

Tensilkut Master Templates for preparing 1.000" wide flexural bars in accordance with ASTM D790 are available for use on all Tensilkut I and Tensilkut II models

Tensilkut Master Templates for preparing 1.000″ wide flexural bars in accordance with ASTM D790 are available for use on all Tensilkut I and Tensilkut II models.

50-78 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790

50-78 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790: for use on 10-30 and 10-58 series Tensilkut I and 10-85 Tensilkut II

50-79 Tensilkut Template for 1.000" wide flexural specimens in accordance with ASTM D790

50-79 Tensilkut Template for 1.000″ wide flexural specimens in accordance with ASTM D790

Tensilshear

October 22, 2013

Tensilshear is a rugged hand shear designed specifically to cut straight strips from sheets of metal.  Strips can rapidly be sheared from sheets of light foil, steel up to 1/16″ thick, or aluminum up to 1/8″ thick.  These strips can then be inserted into templates for the Tensilkut I or Tensilkut II, and cut into tensile specimens.  Other applications include preparing blanks for paint, corrosion or similar tests.

Tensilshear for straight strips

Tensilshear for straight strips

Tensilshear

Tensilshear

The hardened blade on the Tensilshear ensures smooth, burr-free strips.  Micrometer gauges at the back enable the user to set the strip width accurately to best suit his needs.

Leave a comment or email for more information.